Overview
Design a universal IoT Bridge PCB — a central hub for onboarding, managing, and facilitating communication between various IoT edge devices.
This is an exploratory design. The goal is to test component compatibility, feature integration, and layout strategies. Some elements may or may not make it into the final production version — design for maximum flexibility and modularity.
Requirements
1. Wireless Communication
| Protocol | Purpose |
|---|---|
| Wi-Fi & Bluetooth | Local network access and short-range device pairing |
| Thread & Zigbee | Low-power mesh networking with smart devices |
| LoRa | Dual role: hub for far-away nodes AND end-node to a LoRaWAN gateway |
| Cellular (GSM/GPRS) | Cellular connectivity with physical SIM slot + eSIM footprint |
LoRa is the tricky one — the bridge must operate in two modes:
- As a local LoRa hub: receives packets from far-away sensor nodes
- As a LoRaWAN end-node: forwards data upstream to a LoRaWAN network server
2. Wired Connectivity & Power Management
- Ethernet + PoE — RJ45 with Power over Ethernet circuitry to power the device from the network cable
- USB-C — fallback power source when PoE is unavailable; also used for programming/debugging
- Power auto-switching — safe handling of dual inputs (PoE + USB-C) with no component damage
3. Memory & Storage
- Flash Memory — minimum 8MB to support:
- Dual firmware partitions (OTA updates)
- Filesystem storage
- MicroSD slot — removable storage for local data logging and config files
4. User Interface
- Utility button — tactile push-button for reset, pairing mode, etc.
- Utility LED — single or RGB indicator for device status
Reference Architectures to Study
| Reference | What to take from it |
|---|---|
| ESP32-C6-1U-N8 | Strong MCU candidate — native Wi-Fi 6, BT5 LE, Zigbee, Thread, 8MB flash built in |
| Heltec WiFi LoRa 32 (V3) | Study the schematic for how ESP32 integrates with an SX1262 LoRa transceiver over SPI |
Tools
- KiCad (preferred)
- Altium Designer or Eagle also acceptable
Deliverables
1. Component Selection Document (PDF/Word)
- List of all major ICs and modules chosen: MCU, LoRa transceiver, GSM module, PoE controller, etc.
- Brief justification for each choice: cost, availability, footprint, compatibility
- High-level block diagram showing how components interface
2. PCB Design Files
- Complete schematic files
- Complete PCB layout files
- Generated BOM (Bill of Materials)
- Gerber files ready for manufacturing
Notes & Blockers
Document any component availability issues or footprint constraints here. Flag for review session if blocked.
Key Design Decisions to Make
- Confirm MCU: ESP32-C6 vs alternatives (nRF9160 for cellular? separate cellular module?)
- LoRa transceiver: SX1262 (likely — matches Heltec V3 reference)
- GSM module: SIM800L vs SIM7600 vs Quectel EC21 (depends on required data speed)
- PoE controller IC selection (e.g., AG9800, TPS23730)
- Power switching circuit: PoE + USB-C priority logic (ideal diode controller like LM66100 or similar)
- Ethernet PHY: standalone IC (e.g., W5500) vs MCU with built-in MAC + external PHY
Jump to a subject
Software engineering
Infrastructure & security
Computer science
Hardware & engineering