[Beginner] — what a signal is, what a system does to it, and the one class of system that makes the whole field tractable.
The kid version first
A signal is just a measurement that changes over time: the air pressure hitting a microphone, the voltage on a wire, the brightness along a row of pixels, your heart rate. A system is anything that takes a signal in and puts a (changed) signal out — a volume knob, an equaliser, a noise filter, an echo.
Digital signal processing is doing this with numbers, on a computer, instead of with analog circuits — and it turns out that almost everything interesting (removing noise, finding a heartbeat, decoding Wi-Fi, recognising speech) is one system acting on one signal.
What a signal is, precisely
A signal is a function mapping an independent variable (usually time) to a value:
- Continuous-time — defined at every instant. Real-world, analog: sound, voltage, temperature. Written
x(t) - Discrete-time — defined only at sample points. What a computer holds: a sequence of numbers. Written
x[n], wherenis an integer index
The whole discipline lives at the boundary between these two — the real world is continuous, computers are discrete, and sampling is the bridge.
Signals can be 1-D (audio, x[n]), 2-D (an image, x[m,n]), or higher (video). The maths is the same in every dimension, which is why the ideas here transfer straight to image processing and to convolutional networks.
The building-block signals
A few idealised signals recur everywhere, because complex signals are built from them:
- The sinusoid
A·cos(2πft + φ)— a pure tone at frequencyf. The single most important signal in DSP, because every signal is a sum of these - The impulse
δ[n]— 1 at n=0, zero everywhere else. A single spike. It’s how you probe a system → the impulse response - The step — 0 then 1. A switch turning on
- The exponential — decay or growth, and the complex exponential
e^{jωn}, which is a rotating sinusoid and the mathematical heart of the frequency domain
What a system does
A system transforms an input signal into an output signal. We classify systems by their properties, because the properties determine what maths applies:
- Linear — scaling the input scales the output, and inputs add: .
- Superposition. This is the property that lets you decompose a hard signal into simple parts, process each, and add the results
- Time-invariant — the system behaves the same today as tomorrow; delaying the input just delays the output. The rules don’t change over time
- Causal — the output depends only on present and past inputs, not the future. Required for real-time processing (you can’t use samples you haven’t received yet)
- Stable — a bounded input produces a bounded output; it doesn’t blow up → filter stability
LTI — the abstraction that makes DSP tractable
Linear Time-Invariant systems are the ones that are both linear and time-invariant, and almost all of classical DSP is the study of LTI systems — because they have an almost magical property:
An LTI system is completely described by its response to a single impulse.
Poke an LTI system with one spike, record what comes out (the impulse response), and you now know exactly what it will do to any input — via convolution. You never have to test it with anything else.
And there’s a second gift: feed an LTI system a pure sinusoid and you get back the same-frequency sinusoid, only scaled and phase-shifted — never a new frequency. This is why the frequency domain is so powerful: an LTI system just applies a “gain and delay per frequency,” which turns hard time-domain problems into simple frequency-domain multiplication.
Why this matters: most useful systems either are LTI (filters, echoes, most audio and comms processing) or are usefully approximated as LTI over a working range. The moment a system is LTI, the entire toolkit — impulse response, convolution, Fourier, transfer functions — applies.
Why DSP is everywhere
Once signals are numbers, you can do anything computation can do, precisely and reproducibly:
- Audio — noise removal, EQ, compression, effects, speech recognition
- Communications — every phone, Wi-Fi and satellite link modulates and demodulates digitally → modulation
- Images and video — filtering, compression (JPEG is DSP), enhancement → graphics
- Sensors and control — filtering noisy readings, extracting signals → control theory, robotics
- Biomedical — ECG, EEG, ultrasound, MRI reconstruction
- Machine learning — a CNN’s core operation is convolution; audio and speech models run on spectrograms → ai-ml
Analog vs digital, briefly: analog processing (op-amps, RC circuits) is instantaneous and continuous but drifts, is hard to change, and can’t do anything complex. Digital is a sampled approximation but is exact, reproducible, reprogrammable, and can run arbitrarily sophisticated algorithms. The world went digital because “reprogrammable and exact” beats “instant and continuous” for almost everything → digital and analog.
Key insight
A signal is a measurement over time, a system transforms it, and the entire classical toolkit exists because Linear Time-Invariant systems are fully described by their response to a single impulse. That one fact — poke it once and you know everything it does — is what makes convolution, the frequency domain, and filter design all work. Learn to recognise when a system is LTI, and the rest of DSP is the machinery for exploiting it.
Related
- sampling and aliasing — the continuous-to-discrete bridge
- the frequency domain — why sinusoids are special
- convolution and LTI systems — the impulse-response payoff
- control theory — LTI systems from the control side
Source: [reference] — Aug 2026.
Software engineering
Infrastructure & security
Computer science
Hardware & engineering